Choosing the right plumber?

The following article was provided by

Most people don’t think about plumbers until they find themselves having a big problem that needs to be fixed right away.

Finding an honest plumber could be a daunting process for some people so if possible make sure you research a plumber who you are likely to be comfortable in using before you actually need their services.

The key to finding a great plumber is to look at their prior jobs. Good plumbers take pride in the work they do so they will have photos and references from previous jobs. If the plumber you are considering hiring does not have references or photos of previous jobs, then it may be wise to stay away from them and find another.

Most plumbers are gas safe plumbers with industry standard qualifications and it is these qualified professionals that stand out from the crowd. Make sure you get a good recommendation and check the references before you hire anyone.

An experienced plumber is able to complete most small jobs in one visit, saving you a lot of hassle in the long run.

Choosing a Room Thermostat

Honeywell Room Thermostat

We have invited Aaron, an experienced Heating Engineer, to tell us what he thinks you should consider when choosing a new Room Thermostat:

“When looking to install temperature control for your central heating system there are a multitude of thermostats available. The majority of people cannot differentiate between all of the different options and may automatically decide based on cost. Trying to decide on cost could actually end up costing more if you do not purchase a suitable room thermostat for your system or needs.

Wired or Wireless?

The majority of homes have a wired room thermostat installed, where the wires usually run inside the wall from the room thermostat to the wiring centre or boiler. If you want to replace a wired thermostat then it can be replaced with a wired or wireless room thermostat.

In the case of a wired thermostat the location is fixed unless you re-run the wires or replace it with a wireless room thermostat, and then the sensor can be positioned with freedom.

Volt-free, Low Voltage or 230 Volts

There are three different power options for wired room thermostats; volt-free, low voltage (usually 24 volts) and 230 volts. The thermostat you require will be determined by the boiler and system you have installed. In the majority of cases it is only combination boilers that require volt-free or low voltage room thermostats and the manufacturer’s instructions should be consulted.

Digital or Analogue

When deciding whether to choose between an analogue or digital room thermostat there are two considerations in my mind: Cost and the ability of the end user.

If you are on a budget then an analogue room thermostat would be the obvious choice. A digital room thermostat is more expensive but can be more accurate and better looking.

For the end user the analogue room thermostat is the most simple and straightforward to use. Especially when considering a room thermostat for the elderly or infirm a room thermostat with easily visible temperature scale and easy to turn dial will be required. Some of the digital room thermostats can be difficult to see and understand for the elderly and infirm.

On/Off or Programmable


Fitting a programmable room thermostat will give you more flexibility when controlling your heating system. This flexibility can lead to complication and difficulty in setting the thermostat. The ease of setting the thermostats will depend largely upon the make and model fitted. Having a large display which is backlit will help greatly.

The majority of people when thinking about how their room temperature is controlled think about it as being either ‘on’ or ‘off’. In my mind this is faulty thinking and is difficult to explain away and doesn’t help when people try to understand the setting of their programmable room thermostat. The room thermostat is there to regulate the room temperature at a desired temperature as set by the user. If for example the thermostat is set to 20 degrees, the heating should be on until the room temperature reaches 20 degrees (unless the programmer switches off). If the thermostat is turned down to 15 degrees the room temperature will fall until it reaches 15 degrees and the central heating will come on to maintain that temperature. With the use of a programmable room thermostat the different temperatures can be maintained automatically throughout the day for user comfort.

Where cost or the ability of the user is a concern a traditional analogue thermostat would be the best choice, either wired or wireless depending upon the installation.

Other Features

  • Temperature limiting stops – prevents the thermostat from being adjusted above or below a pre-set limit.
  • Setback Function – The set temperature is reduced at the press of a button.
  • Chrono-proportional cycle rate – The number of times per hour which the thermostat clicks on and off at can be altered to reduce the on-off firing of the boiler and intrusion of clicking from the thermostat. Also used for setting the thermostat for use with different types of heating emitters.
  • Automatic summer/winter change – eliminates the need to adjust the clock when the clocks change.
  • Frost protection – A mode which sets the temperature to a desired minimum to protect the heating system when the home is not occupied.
  • Optimal start control – The room thermostat tries to come on before the set time in order that the room temperature is achieved at the set time.
  • 24 hour, 5/2 day, 7 day settings – Programmable for either the same every day (24 hour), different settings for the weekdays to weekend (5/2 day) or different every day of the week (7 day).
  • TPI Control – As the room temperature is neared the thermostat demands the b oiler to fire for shorter periods helping to maintain the room temperature.
Honeywell CM927

Honeywell CM927


If I had to recommend a room thermostat it would depend upon the installation and the user’s requirements/ability.

  •  Wireless Programmable Room Thermostat – Honeywell CMT927
    Large, easy to use, backlit display with many features. 7 day programmable but can also be used as a simple manual thermostat.
  • Wireless Digital Room Thermostat – Honeywell DT92E
    A wireless version of the Honeywell DT90E. Simple to use digital thermostat with a variety of useful features such as an eco set-back function.
  • Wireless Analogue Room Thermostat – Honeywell Y6630D
    Only slightly cheaper than the digital Honeywell DT92E, but a good choice if you need a wireless analogue thermostat.
  • Wired programmable Room Thermostat – Honeywell CMT907
    Wired version of the Honeywell CMT927. Large, easy to use, backlit display with many features. 7 day programmable which can also be used as a simple manual thermostat.
  • Wired Digital Room Thermostat – Honeywell T90E
    Simple to use digital thermostat with a variety of useful features such as an ‘eco’ set-back function.
  • Wired Analogue Room Thermostat – Honeywell T6360B
    Classic design, with simple and reliable construction. Relatively easy to read scale, with markings at every degree. Large easy to turn dial.
Honeywell CM907

Honeywell CM907

As you may have noticed I am a big fan of Honeywell products and would generally choose them over other makes if cost was not a deciding factor. Even when there are options available which are much lower in cost it may not be advisable to purchase them as they may not be as easy to use or have the same functions.”About this article: Aaron was invited to write this article for Direct Heating Supplies. He is an experienced heating engineer of over 10 years and writes his own Gas Central Heating Blog.